Adjustable Width Aluminum ATV Loading Ramps

Adjustable Width Aluminum ATV Loading Ramps Review

Adjustable Width Aluminum ATV Loading Ramps Feature

• 76" long, adjustable width (42" to 52") aluminum loading ramps
• Load ATVs and other off-road vehicles weighing up to 1,200 lbs. into pickup truck beds or onto trailers
• Includes (2) safety straps to prevent ramp kick-outs
• Pin-locking quick clips allow easy width adjustments to match truck tailgate or trailer sizes
• Heavy duty all aluminum construction

76" long, adjustable width (42" to 52") aluminum loading ramps designed to load ATVs weighing up to 1,200 lbs. into pickup truck beds or onto trailers

9 ' Arched Folding Motorcycle / ATV Loading Ramp - 4 Beam Heavy Duty Design

9 ' Arched Folding Motorcycle / ATV Loading Ramp - 4 Beam Heavy Duty Design Review

9 ' Arched Folding Motorcycle / ATV Loading Ramp - 4 Beam Heavy Duty Design Feature

• Fold to half length for easy storage and transport
• Slip resistant serrated rung design prevents wheel slippage
• Arched design to increase clearance
• Designed to walk up or ride bike up and down
• 1500 lbs total capacity

This Lightweight, heavy duty aluminum folding motorcycle ramp comes 108 inches long. These Ramps are a full 40 inches wide so you can put your feet down when riding the bike up, and most importantly, when backing the bike out of the truck down the ramp. Simply pull in the clutch or put bike in nuetral, grab your brake, put down your feet and take your time going backwards down the ramp. The ultimate in safety! Your best choice for big bikes or other 4 wheeled vehicles. These ramps come in 3 separate folding sections that fold to half their length so they will fit in a short bed truck or even your cab. They can be bolted all together for added strength when loading heavier bikes or can be used as 3 separate sections for loading other 4 wheeled vehicles that are wider than 40 inches. The two 11 inch wide side sections are separate components and work great as a pair of dual ATV Ramps for loading ATV's, garden tractors, and lawn mowers with a 1200 lb capacity! Add your center section and have a HUGE 40 inch wide deck to put down your feet and ride your motorcycle up or back down in a controlled and safe manner. All these high quality ramps are arched for additional clearance and include 3 safety straps (safety straps should be used whenever loading to prevent ramp movement).

89" Dual Arched Folding ATV Loading Ramps

89" Dual Arched Folding ATV Loading Ramps Review

89" Dual Arched Folding ATV Loading Ramps Feature

• Dual arched powersport ramps designed for loading ATVs, lawn tractors and off-road vehicles weighing up to 1,500 lbs.
• Hinged folding wide track design works with all ATV tire widths
• Serrated rungs grip ATV tires for maximum traction during loading
• Includes (2) adjustable safety straps to prevent ramp kick-outs
• Lightweight aluminum construction

ATV Loading Ramps dual arched for maximum clearance work with all ATV tire widths and have serrated cross rungs for maximum loading traction. Rubber tipped fingers prevent surface scratches and the all aluminum construction will not rust. Each 7'5" L x 11.26" W ATV Loading ramp folds to 45.12" L x 6-1/4" H. The pair will hold up to 1,500 lbs distributed weight.

TMS Heavy Duty 500 lb Mobility Hitch Carrier Power Electric Wheelchair Scooter Medical with Loading Ramp and Anti-Tilt

TMS Heavy Duty 500 lb Mobility Hitch Carrier Power Electric Wheelchair Scooter Medical with Loading Ramp and Anti-Tilt Review

TMS Heavy Duty 500 lb Mobility Hitch Carrier Power Electric Wheelchair Scooter Medical with Loading Ramp and Anti-Tilt Feature

• Heavy duty steel construction; Durable black powder coated finish; Platform dimension : 30 X 50 inch
• Total length of ramp when expended is 42 inch; Weight of ramp (gate) 16 lbs .easy to lift; Weight Capacity of Ramp: Up to 500 lbs
• Has a 3-1/2 inch safety rail; Includes an anti-tilt locking device to prevent the rack from wobbling
• Fits all 2" Receiver, hitch class III or IV; Folding ramp can also be locked flat when not in use; Heavy duty folding hitch makes our carrier more rigid and stronger
• Folding ramp is easily locked upright; Heavy duty internal spring loaded pull locks

THIS IS THE PLATFORM & RAMP ALL IN ONE & IT JUST SLIDES INTO THE HITCH ON BACK OF THE CAR. This wheelchair carrier is designed to allow easy loading and transporting of your wheelchair, scooter or other item. The wheelchair carrier features an integrated ramp which fold up and out into 3 different positions. 1. The first position keeps the ramp folded flat to the carrier surface and held down with 2 quick release pins, will keep the ramp self stored and secured when not in use. 2. The secound ramp position allows the ramp to stand up straight when a mobility device is on the carrier. The ramp is held vertically in place with 2 quick release pins. 3. The last position is the ramp unfolded, This position allows for scooters or power wheelchairs to be pushed or driven up the ramp.

Matrix Concepts M6-101 Black 6' Folding Loading Ramp

Matrix Concepts M6-101 Black 6' Folding Loading Ramp Review

Matrix Concepts M6-101 Black 6' Folding Loading Ramp Feature

• Lightweight ABS glass filled plastic
• T6 Aluminum rails (500 pounds rating)
• Folding Hinge with Lifetime Warranty
• Removable soft rubber tongue bottom and slide forward stopper
• Complete unit 2 year limited warranty

Matrix M6 Folding Ramp has ABS glass filled plastic with 6061 T6 aluminum rails, reinforced for high strength, light weight folding ramps. ABS glass filled injection molded plastic outer construction. Lightweight weighing only 11 pounds.Design includes our exclusive center traction ribbed beam design for easy non-slip loading. Strengthened with 6061-T6 aluminum reinforced inner rails that rates this ramp at over 500 pounds and more. Self-lubricating folding hinge with "lifetime replacement warranty" against bending or breaking. Hinged, replaceable lower plastic feet that work at any angle. Exclusive two (2) year limited warranty against bending or breaking. Center handle allows for easy handling and folds in half for easy transportation and storage. Personalize it. Ramps can by customized by Matrix's graphic partner, DeCal Works. Replaceable soft rubber bottom tongue plate. Eliminates excess sliding when loading. Plastic outer construction eliminates it messing up your truck bed. With over 30 months invested in product development, design, testing and input from some of the top riders and mechanics in the world of off road motorcycling including MX legend Bob Hannah, Chadd Cole, Cameron Cole, Brady Sheren, Arnold Taylor and Brad McLean are proud to introduce the Matrix Concepts line for 2010. The design team wanted to introduce a new approach to some old school products and developed a four part design criteria; 1) Make the products from high strength ABS plastic that was lightweight and very strong, 2) Offer new innovative features that improved the product over the competition, 3) Give the rider the ability to personalize the products with their name/number giving them the "factory look", 4) Offer a great retail value. Phase 1 for 2010 is focused on off road stands, loading ramps, tie-downs, utility cans and unique line of work mats.

96" Dual Runner Steel ATV Loading Ramp Kit

96" Dual Runner Steel ATV Loading Ramp Kit Review

96" Dual Runner Steel ATV Loading Ramp Kit Feature

• Dual runner ATV loading ramps with a maximum 1,400 lb. capacity (700 lb. per runner)
• High traction with U-Channel rungs
• Folds compact to 37"L x 12"W x 13"H for storage
• Full kit assembles in about 25-30 minutes
• Heavy duty steel construction

96" Dual Runner Steel ATV Loading Ramp Kit with a double fold design. Folds compact to 37"L x 12"W x 13"H for storage. Dual runner ATV loading ramps with a maximum 1,400 lb. capacity (700 lb. per runner). Full kit assembles in about 25-30 minutes. Heavy duty steel construction with high traction U-Channel rungs.

Aluminum Ramp 4 ft. - Motorcycles Onto Trailers - Ramps

Aluminum Ramp 4 ft. - Motorcycles Onto Trailers - Ramps Review

Aluminum Ramp 4 ft. - Motorcycles Onto Trailers - Ramps Feature

• 1,500 lb. plus - distributed center load capacity
• All aluminum, 6061 alloy construction. Lightweight, weighing only 30 lbs.
• Built-in extra center support for loading the heaviest bikes.
• Twice as many crossrods than normal ATV ramps, for safe footing
• Serrated crossrod design for awesome traction

Folding Aluminum Ramp Made in the USA by Five Star Mfg. Model # 5244MCDR *Photos depict loading onto a trailer 12" high * This ramp is specially designed for loading motorcycles onto trailers. Can also be used for loading items into a shed. Eliminate the worry of safely loading your motorcycle. The ramp is 4 feet long by 44 inches wide (folds to 22 inches wide), giving you plenty of room to ride up the ramp while safely planting your feet. Most ATV ramps are rated for four wheel distribution and will fail under the weight of the largest cruisers riding up the middle of the ramp. Whereas this ramp handles the center weight and delivers under the most extreme circumstances! This ramp comes complete with two cam buckle tie down straps to safely secure the ramp to the trailer. For large cruisers, this ramp works well when loading onto surfaces up to 12" high. For trailer surfaces higher than 12" it is recommended that you utilize either a 6 ft. long ramp or the 7 ft. version. The 6' or 7' versions can be found in our Amazon Storefront by clicking our company Logo. This ramp can be shipped via Fed Ex Ground.

Raider BCS-1006 7' 4" Long Motorcyle Ramp

Raider BCS-1006 7' 4" Long Motorcyle Ramp Review

Raider BCS-1006 7' 4" Long Motorcyle Ramp Feature

• Bi-fold ramp style
• Aluminum construction
• 11 inch wide
• 750 pounds weight capacity

Heavy duty Raider loading ramps are designed for quick and easy loading onto your vehicle or trailer. Designed to fold 1/2 of it's width for compact storage. Perfect for ATV's, motorcycles, lawn tractors, and even snowmobiles.

Highland 0700500 8" Aluminum Ramp Kit

Highland 0700500 8" Aluminum Ramp Kit Review

Highland 0700500 8" Aluminum Ramp Kit Feature

• Include ramp tops and bottoms
• Made from high quality extruded aluminum
• Feature non skid surface
• Includes installation hardware
• Each top comes with protective rubber pads to protect the tailgate

Highland 8" Aluminum Ramp Kits include ramp tops and bottoms. They are made from high quality extruded aluminum for greater strength and feature non skid surface to prevent slipping. These ramp kits come with protective pads to protect tailgate and hardware for easy installation.

Extreme Max 5500.4048 8' Aluminium UTV Ramp Set - 3000 lb

Extreme Max 5500.4048 8' Aluminium UTV Ramp Set - 3000 lb Review

UTV Ramp Set is over built to load utility vehicles, compact tractors and other equipment with confidence. Heavy duty safety straps hold them in place. Constructed from 60 pound mass of welded 6063 aluminum, it is made strong. The arched design adds clearance and even more capacity (3000 pound mass). Raised edges help guide the tires. It folds for storage and easy transport.

60" Aluminum Truck Trailer Ramps

60" Aluminum Truck Trailer Ramps Review

60" Aluminum Truck Trailer Ramps Feature

• Trailer loading ramps for pickup trucks, cars, ATV, UTV and other small utility equipment
• Maximum 5,500 lb. distributed vehicle weight
• Low profile, slim design for compact storage (only 2"H)
• Not compatible with Beavertails
• Heavy duty all aluminum construction Made in the USA

Pair of 60" long Aluminum Trailer Ramps for cars, mid-size pick-up trucks, small tractors, utility ATV's & other wheeled vehicles less than 3,000 lbs. per axle (5500 lb maximum distributed vehicle weight). These Canaramp ramps are the strongest & lightest auto ramps in the industry. Recommended for trailers up to 16" high. MADE IN THE USA - ONLY 18 LBS EACH! 03-12-060-046-S

Extreme Max Aluminum V-Slide Snowmobile Dolly System Set of 3

Extreme Max Aluminum V-Slide Snowmobile Dolly System Set of 3 Review

Extreme Max Aluminum V-Slide Snowmobile Dolly System Set of 3 Feature

• High impact 3" nylon/tread wheels
• Constructed out of heavy duty aluminum
• Deep V design fits all skis
• Double Tie Down straps provide secure fit
• Oversized for extra stability

Moving your snowmobile just got easier. The Extreme Max V-Slide Aluminum Snowmobile Dolly System has revolutionized snowmobile moving and storage. Now you can easily maneuver your snowmobile into tight spaces with the "Easy Roll" casters maximizing space and minimizing your effort. V-Slides are compatible with all skis on the market so they are the perfect fit for every leisure rider, racer, and snowmobile enthusiast.

Reduce push effort by 50%

Rugged Design

The V-Slide Aluminum Dolly system is built to stand the test of time. Each dolly plate is constructed out of high quality powder coated aluminum which provides protection from the elements and prevents corrosion and rust. The casters have oversized two ply constructed 3" rubber/nylon wheels and a sintered steel centered bushing. This makes the wheels not only maneuverable but durable and extremely stable.

Reduce Push Effort by 50%

The "Easy Roll" casters provide 360° of easy rotation. This allows you to position your snowmobile in tight spaces with minimal effort. In a side by side comparison the V-Slide Aluminum Dolly system reduced pushing effort by 50%. Now anyone has the ability to quickly and easily move their snowmobile without stress or strain on their body. Spend less time getting your snowmobile in and out of storage and more time riding the lakes, trails, and enjoying the winter weather.

Simple protection against the wear and tear of moving your snowmobile

Secure Fit for All Snowmobiles Skis

The heavy duty front plates of the V-Slide Aluminum Dolly System have double lock straps. These assure that the ski stays firmly attached to the plate whether you are going forwards or backwards. They even stay secure when you are rotating 360° on any type of surface. The deep V design on the front plates provides extra security and is compatible with all skis on the market today which means no matter what type of snowmobile or skis you have this dolly system will work for you.

Protect Your Snowmobile

Everyone wants to get the most out of each riding season and their snowmobile. Protect your snowmobile from unnecessary wear and tear when you use the Extreme Max V-Slide Aluminum Dolly System. No more shoving, scraping, sliding, and wasted effort attempting to properly position your snowmobile when not in use. The V-Slide Dolly system front and rear plates elevate your snowmobile skis and track. This removes them from damaging surfaces like gravel, tar, and concrete, which extends the life of your entire sled. When your snowmobile is not being used the V-Slide System makes storage a snap. Now you can position your snowmobile anywhere you like safely and securely. The 360° casters allow you to easily maneuver your snowmobile into the tightest areas which saves space in your garage, shop, or trailer.

Easy to Use Features

• Front and Rear Plates have "Easy Roll" Casters
• Oversized 3" rubber/nylon wheels with sintered steel center bushing
• Plates constructed out of powder coated aluminum
• Double tie down straps on front plate
• Oversized for additional stability
• Front Plates: 8" L x 10" W x 4" H
• Rear Plates: 8" Across and 4" Tall
• 2 Year Limited Warranty

About Extreme Max Products

Extreme Max is a manufacturer of high quality Snowmobile, ATV, Marine products and accessories, offering a wide variety of products that fit nearly every make and model of snowmobile, boat or ATV. Extreme Max takes great pride in designing and manufacturing every piece of equipment in the product line, and in designing products to fit the current industry demands. But most importantly all products are designed to fit the customer's demands. Extreme Max employees are the same people you find on the trails after dusk, in the mud and dirt until the job is done, the first ones on the water in the morning and the last ones off the water in the evening. Extreme Max loves the recreational life and lives it every day. Every Extreme Max product manufactured is the same product installed on its own employees' vehicles. Extreme Max will not make any exceptions for quality and neither should you.

The V Slide dolly system is ideal for all snowmobiles and fits all ski widths. Our dollies come with "Easy Roll" casters for both the front and rear plates. These casters have oversized 3" wheels with two ply construction and a sintered steel center bushing. This makes the wheels strong but easy to move. In side by side comparisons our V Slide system reduced pushing effort by 50%. Our heavy duty front plates have double lock straps to assure that the ski stays firmly attached on any surface or direction. The front plates measure approximately 8" long x 10" wide x 4" tall. The rear plate measures approximately 8" across x 4" tall.

89" Arched Folding Motorcycle Ramp System

89" Arched Folding Motorcycle Ramp System Review

89" Arched Folding Motorcycle Ramp System Feature

• Ideal for loading motorcycles, street bikes and cruisers onto low 4 x 2 trucks or trailers (1,500 lb. capacity)
• Arched design provides additional clearance and stability
• High traction rung design also cleans tires
• Includes (3) safety straps to prevent ramp kick-outs and (2) side straps to prevent sliding
• Light weight aluminum construction

All aluminum, 89" long folding arched motorcycle ramp system with a 1,500 lb capacity center ramp. The arched frame allows for added clearance and a solid lip plate and finger system ensures ramp stability. Includes 5 safety straps to prevent ramp kick outs to the back and sides, slip resistant serrated rungs and the unique ability to attach each piece together for a more evenly distributed load when loading heavier motorcycles.

9' Black Widow Extra Wide ATV Off-Road Loading Ramps

9' Black Widow Extra Wide ATV Off-Road Loading Ramps Review

9' Black Widow Extra Wide ATV Off-Road Loading Ramps Feature

• Extra wide (17") loading ramps for ATV, Golf Carts, John Deere Gators, Mules, and other 6 wheel or 4 wheel off-road equipment weighing up to 3,000 lbs.
• Hinged folding system allows ramps to be stored at 54.5"L x 6.125"H
• Features heavy duty serrated 5/8"D rungs with 2.5" spacing, full width solid attaching lips, and tapered feet
• Includes (2) safety straps to prevent ramp kick-outs
• Heavy duty (4) beam aluminum construction with a black powder-coat finish

These extra wide folding arched dual ramps are 17" wide and have an aluminum construction making them lightweight and easy to handle. They are the perfect solution for loading heavier all terrain and utility vehicles including lawn mowers, garden tractors, ATV's, golf carts, John Deere Gator's, Mules and other 6 wheel & 4 wheel equipment into your pick-up truck or trailer. These folding dual runner arched ramps are easy to set up, transport and store. The heavy duty hinge system allow a generous 3000 lb. equally distributed weight capacity. Dual runner folding arched ramps are easy to set up, transport and store. These high quality atv ramps are full of safety features such as safety straps to keep the ramps in place, a full width plate style attaching lip for the most area of contact on your loading surface, and serrated cross bars for sure traction even in the mud, rain or snow. Sold in Pairs. BW-10817-HD-2

Highland 0700100 Aluminum Ramp Top Kit - 2 Piece

Highland 0700100 Aluminum Ramp Top Kit - 2 Piece Review

Highland 0700100 Aluminum Ramp Top Kit - 2 Piece Feature

• Designed to turn ordinary boards into sturdy ramps
• Made from high quality extruded aluminum
• Feature non skid surface
• Includes protective pads to protect the tailgate and installation hardware

Highland Aluminum Ramp Top Kits are designed to turn ordinary boards into sturdy ramps. They are made from high quality extruded aluminum for greater strength. These tops feature non skid surface to prevent slipping and are corrosion resistant. They include installation hardware and protective pads to protect the tailgate.

82" Aluminum Bi-Fold ATV Loading Ramp

82" Aluminum Bi-Fold ATV Loading Ramp Review

82" Aluminum Bi-Fold ATV Loading Ramp Feature

• Bi-Fold ramp for loading ATVs and other off-road equipment weighing up to 1,500 lbs. into pickup trucks or trailers
• Folds in half for compact storage under or beside the ATV
• Full-width attaching lip
• Includes (2) adjustable safety straps to prevent ramp kick-outs
• Heavy duty aluminum construction

Load ATVs, Quads, and other off-road vehicles weighing up to 1,500 lbs. easily with F-8244-1500A Aluminum Bi-Fold ATV Loading Ramps. Includes (2) safety straps to prevent ramp kick-outs, a full width attaching lip, and 4-1/4" rung spacing. Folds in half for compact storage. Heavy duty, all aluminum construction built to last.